SoCal Jet Boats
Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: carrera202 on October 17, 2013, 08:50:20 PM
-
I have small chips in my gel coat I was wondering if color sanding would do the trick or if I need to do something else I will take pics tomorrow and post any suggestions would be greatly appreciated thank you in advance!!!!!
Wes
Sent from my iPhone using SoCalJetBoats
-
I had a small chip in the back left bottom of my boat and happend to be at home depo and found a 2 part epoxy. has a picture of a jet ski on the front of the package only comes in white awesom stuff cheap fix .
Sent from my SPH-D710 using SoCalJetBoats mobile app
-
With that epoxy no sanding needed
Sent from my SPH-D710 using SoCalJetBoats mobile app
-
I had a small chip in the back left bottom of my boat and happend to be at home depo and found a 2 part epoxy. has a picture of a jet ski on the front of the package only comes in white awesom stuff cheap fix .
Sent from my SPH-D710 using SoCalJetBoats mobile app
whats up Rosario How the hell are ya? That sounds like good stuff but my chips are in the color just below the rub rail so if it dries clear we're good
Sent from my iPhone using SoCalJetBoats
-
Im good.colors are hard to fix because the color is going to be hard to match.I do not know the name of the company but their is a kit you can buy.and you have to know what you are doing to be able mix the right colors.I do not remember what it cost but gs marine does color matching I had the same problems with mine he match it dead on.go on youtube if you want to try to fix yourself they can possibly help you.good luck.
Sent from my SPH-D710 using SoCalJetBoats mobile app