SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: twinturbo on October 29, 2015, 09:17:10 PM

Title: SST sleek craft
Post by: twinturbo on October 29, 2015, 09:17:10 PM

1980 SST sleek craft.
 I have a few questions help

One  there is no exposed stringer. if I was to put a rail kit in how what I anchor it to the floor?  Stainless studs which have the screw on the bottom and threads on the top?
As it sits now one stud for the three-point mounting system spins in the floor.

Two. everyone seems to be telling me to set the pump back is it worth all that time and work to set it back. I am mechanically inclined just need some tips and our pictures. A phone number of someone who could give me a few good tips?

Three.  Last which would be better for my set up/boat a droop snoot which is on it with the place diverter or a straight snoot ? I don't know which application is better for either or snoot.
 you thank





Twinturbo

Title: Re: SST sleek craft
Post by: dmacattack on October 30, 2015, 07:57:22 PM

I may to be able to help you out a little. Dustin, 805 651 9357

Title: Re: SST sleek craft
Post by: matches909 on October 30, 2015, 09:33:06 PM

I have a droop on mine and I love my boat they are fast boats I hope you enjoy it and your is very pretty


Sent by a Sleekcraft SST owner on the SoCal Jet boat app

Title: Re: SST sleek craft
Post by: twinturbo on October 31, 2015, 02:53:39 PM

Do you have a few more pictures your boat looks good. What type of speeds are you hitting? Thanks

Title: Re: SST sleek craft
Post by: matches909 on October 31, 2015, 02:57:32 PM

At the river I run in between 80-85 depending on going up or down river


Sent by a Sleekcraft SST owner on the SoCal Jet boat app

Title: Re: SST sleek craft
Post by: twinturbo on October 31, 2015, 03:04:10 PM

What are you running for horsepower and torque plus impeller and RPMs. Thanks

Title: SST sleek craft
Post by: matches909 on October 31, 2015, 03:05:27 PM

I have a bbc 502 with an a impeller at 5k


Sent by a Sleekcraft SST owner on the SoCal Jet boat app

Title: Re: SST sleek craft
Post by: eastcoastboys on November 14, 2015, 06:25:38 AM

We are going 4 point in ours. Floor has been cut out due to major rot from a bad transom and the dumb through hull motor mounts. We plan on glassing stainless steel right in with the plywood.


Sent from my iPhone using SoCal Jet Boats

Title: Re: SST sleek craft
Post by: tunnels on November 14, 2015, 07:42:51 PM

http://www.performanceboats.com/images/icons/icon1.png (http://www.performanceboats.com/images/icons/icon1.png)
Hope this helps.

Title: Re: SST sleek craft
Post by: matches909 on November 15, 2015, 12:29:47 AM

That build page on performance boats is a good one to get ideas from I'm going to be using some here soon


Sent by a Sleekcraft SST owner on the SoCal Jet boat app