SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: bluenun on April 23, 2007, 03:56:04 PM

Title: Tahiti Bilge Finally Done
Post by: bluenun on April 23, 2007, 03:56:04 PM

Its finally done. I went with DupliColor BedLiner kit from Wal Mart on a recommendation at a paint store locally. They did a whole boat (insaide) and I really liked it. The kit was $43 from Wal Mart about $8 cheaper than autoparts stores and easy to apply. Very forgiving with uneven areas and feels real strong.

I textured the sides by the tanks for traction and I might still carpet back there. I used an ultra fine roller for the stringers and the bilge. Im really happy with the results.

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi95.photobucket.com%2Falbums%2Fl132%2Fswat2380%2F104_0965.jpg&hash=faefe8ef4b86f2104c49e868b49667e6602cb5e5)

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi95.photobucket.com%2Falbums%2Fl132%2Fswat2380%2F104_0968.jpg&hash=6f60bdddae94ba0f5c89b0099985356c7342fc6b)

Title: Re: Tahiti Bilge Finally Done
Post by: HDriderTH on April 23, 2007, 04:36:13 PM

Looks good, lets get r done....missed you at Parker!