SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: beerjet on July 29, 2007, 11:44:57 AM

Title: Where is the best place to buy it
Post by: beerjet on July 29, 2007, 11:44:57 AM: Fiberglass cloth and mat for ...... oh I dont know ...... installing stringers .

-beerjet-
Title: Re: Where is the best place to buy it
Post by: Marcsrollin on July 29, 2007, 01:36:56 PM: There is a place in San Diego called Diversififed Materials Company that sell everything wholesale to the public. Even carbon fiber!
Title: Re: Where is the best place to buy it
Post by: GAWnCA on September 07, 2007, 05:02:40 AM: Quote from: Marcsrollin on July 29, 2007, 01:36:56 PM
There is a place in San Diego called Diversififed Materials Company that sell everything wholesale to the public. Even carbon fiber!

Do they have a web site? I've got Tapp Plastic here in town but no one there even wants to wait on you so screw them!
Title: Re: Where is the best place to buy it
Post by: h2oicon on September 07, 2007, 06:43:33 AM: beerjet, i have ordered some from this guy for years it cheap and when you call he will answer all questions, go to www.jgreer.com its good stuff and how much fiberglass do you need i have alot of the shit and the resin and cati to do it i live down the parking lot from you oh that is the 210 frwy in san dimas call me 714.420.8648
Title: Re: Where is the best place to buy it
Post by: h2oicon on September 08, 2007, 08:16:41 PM: beer, did that work out or was it to thick for your use hmmmmmmmmm 8) 8)
Title: Re: Where is the best place to buy it
Post by: beerjet on September 09, 2007, 11:52:35 AM: It took 10 minutes to drive to your house , and thanks an ass load for the glass and resin . Unfortunatly I cant start on that project until after the ming race , so till then :-\

-beerjet-
Title: Re: Where is the best place to buy it
Post by: GAWnCA on September 11, 2007, 06:04:40 AM: Quote from: h2oicon on September 07, 2007, 06:43:33 AM
beerjet, i have ordered some from this guy for years it cheap and when you call he will answer all questions, go to www.jgreer.com its good stuff and how much fiberglass do you need i have alot of the shit and the resin and cati to do it i live down the parking lot from you oh that is the 210 frwy in san dimas call me 714.420.8648

Hi H2O,

Thanks for this link, it has lead me to a wealth of information including the System Three Epoxy resin product line. I've got a 1975 Miller bubble deck boat that the engine let go on me a couple of week ago and now while the engine is out and the search for a buildable block is on, I may as well do some of the inside hull work. If I don't get to it in the hear future, at least I'll have the sources to do the job right in the not too distant future. Beer... When you get to your project, post some photos. :)