SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: riefer jet on September 28, 2013, 12:59:27 PM

Title: Wood / glass repairs
Post by: riefer jet on September 28, 2013, 12:59:27 PM

So I'm looking for feedback from people with experience repairing rotten wood shown below. I was replacing rotted wood between the bilge and ski locker and uncovered the ski locker floor to find this. It seems like I can remove the wood and should find fiberglass? I guess just looking for opinions... I have to repair it somehow. Thanks

Title: Re: Wood / glass repairs
Post by: riefer jet on September 28, 2013, 01:02:20 PM

Ski locker floor

Title: Re: Wood / glass repairs
Post by: Your Mom on September 28, 2013, 03:11:52 PM

You don't need wood at the bottom of your locker. If your going to reinforce anything in there just make sure to use marine fiber. Its real thick and can be purchased at a fiberglass store. I went and gel coated my entire floor. Heres my floor build...
http://www.socaljetboats.com/projects/new-floor-install/ (http://www.socaljetboats.com/projects/new-floor-install/)

Title: Re: Wood / glass repairs
Post by: riefer jet on September 29, 2013, 06:39:51 PM

Thanks

Sent from my XT907 using SoCalJetBoats mobile app