SoCal Jet Boats
Tech Talk => Hulls => Topic started by: avengerdaycruiser on October 02, 2010, 09:33:26 PM
-
Found this walking the dog the other day and asked the old man cleaning out his garage about it and he offered to sell it. Not like I need another project but is it a good hull. It is a V-drive of course but was just wanting some input. He was thinking around $900 for the hull and trailer. All it needs is a motor.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi597.photobucket.com%2Falbums%2Ftt52%2Fgartonadam%2F3ka3pd3o65T15Z35W5a9381821bd582d911fa.jpg&hash=d192a79e14369d62fb80a55fe93e3ce684ad8e3a)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi597.photobucket.com%2Falbums%2Ftt52%2Fgartonadam%2F3nb3k13m25Q05W35U5a93f9e3559bd7f2124e.jpg&hash=2565db3b7f026cf46df662ba13b9f2c8ca1e52ce)
-
hull looks like its in good shape. trailer is ehhhh, is that carpet on the sides? a tandem is gonna tow better. but for $900 u cant be too picky for a sanger in good condition.
-
Grab it. Offer him $750 and if he doesn't take it give him the $900 if all the normal things check good. Be sure to ask if he has any extra props hanging around (could save you some money later).
-
Looks good, how does the inside/floors look.
-
If the drive, steering and brackets/pulleys, and shafts, etc are all in place, WTF is there to think about? Get it before Mouzer does.......
Never heard of "Grand Theft Boat" before, but that looks like a great starting point for a charge like that! :thumbup:
Ray
-
I went back today to take a more in depth look again. Everything is there including the driveline, hallcraft v-drive, guages, steering is in great shape and lots of aluminum everywhere that has held up well, and 2 bronze props......just one problem I grabbed the trim handle for the cavitation plates and it about pulled out of the left stringer. I think this hull looks great but has some underlying stringer issues uugh
-
hey aveng-where in grants pass are you-if you dont i might-
i have a house in gp-on the golf course=2 acres and for sale
-
I went back today to take a more in depth look again. Everything is there including the driveline, hallcraft v-drive, guages, steering is in great shape and lots of aluminum everywhere that has held up well, and 2 bronze props......just one problem I grabbed the trim handle for the cavitation plates and it about pulled out of the left stringer. I think this hull looks great but has some underlying stringer issues uugh
water damage or delam? kinda weird how it could pull out of a stringer, was it mounted thru the stringer with some washers and a nice SS bolt with teflon nut? or did they jimmy rig it with some drywall screws or something?
-
The boat is on east evans creek rd.
And it was bolted through the stringer with the right hardware and the whole handle you could pull side to side. Then found an old mounting hole in front of the handle and stuck a screwdriver into it. looks like water damage, hard to tell if its the whole stringer
-
The boat is on east evans creek rd.
And it was bolted through the stringer with the right hardware and the whole handle you could pull side to side. Then found an old mounting hole in front of the handle and stuck a screwdriver into it. looks like water damage, hard to tell if its the whole stringer
dont walk, run away from it. hehe.
-
Its a bitchin hull....but I somehow feel like I have been down his road before and No Thanks
-
:thumbup: