SoCal Jet Boats
Tech Talk => Hulls => Topic started by: brian777 on October 13, 2016, 11:25:36 PM
-
Just picked one up anyone have any info on these hulls?
Sent from my iPhone using SoCal Jet Boats
-
Pictures! Or it didn't really happen
-
Pictures! Or it didn't really happen
Sent from my iPhone using SoCal Jet Boats
-
Was told it was ed places old race boat called going places
Sent from my iPhone using SoCal Jet Boats
-
Just picked one up anyone have any info on these hulls?
Sent from my iPhone using SoCal Jet Boats
There have been a few around the forums. Supposed to be good hulls based on the SWTD.
The most notable one I would say was owned by a guy named William that ran a nitro fuel motor and had it up to 150-ish MPH. Tom from JBP had one and liked it.
Use the search feature on here and Performance Boats. There are quite a few threads about them.
What motor are you planning to run in it?
Good luck on the build
-
There have been a few around the forums. Supposed to be good hulls based on the SWTD.
The most notable one I would say was owned by a guy named William that ran a nitro fuel motor and had it up to 150-ish MPH. Tom from JBP had one and liked it.
Use the search feature on here and Performance Boats. There are quite a few threads about them.
What motor are you planning to run in it?
Good luck on the build
ive read the thread about toms boat but the pics where deleted also I was told this boat ran 163 with 800 hp I'm only going to put 550-600 hp in it and I've also heard the bottom was the same as the swtd guess someone sold the mold out the back door from southwind and I was told the top is a regatta just would like to see some setups but I guess there were only a few made as the company was sued over the bottom being a swtd🤔
Sent from my iPhone using SoCal Jet Boats
-
Nordic and a tunnel!!!!!!
Which one are you gonna build first? $$$$$
-
Nordic and a tunnel!!!!!!
Which one are you gonna build first? $$$$$
nordic is almost done and it's sold now the tunnel that will be next winters project and my hallett is almost done and will be ready for next season I'm fucking addicted it's like crack but way more expensive 😜👊🏻🍺
Sent from my iPhone using SoCal Jet Boats
-
Here's the Nordic
Sent from my iPhone using SoCal Jet Boats
-
Hell yah!!!!!!
I'm hoping uncle Sam is good to me this year so I'll have funds to finish the bahner. Upgrades are expensive. FML..... Good luck with the tunnel.
-
Hell yah!!!!!!
I'm hoping uncle Sam is good to me this year so I'll have funds to finish the bahner. Upgrades are expensive. FML..... Good luck with the tunnel.
thank bro 👍🏻👊🏻
Sent from my iPhone using SoCal Jet Boats
-
ive read the thread about toms boat but the pics where deleted also I was told this boat ran 163 with 800 hp I'm only going to put 550-600 hp in it and I've also heard the bottom was the same as the swtd guess someone sold the mold out the back door from southwind and I was told the top is a regatta just would like to see some setups but I guess there were only a few made as the company was sued over the bottom being a swtd🤔
Sent from my iPhone using SoCal Jet Boats
sorry I was wrong said it went 152.7
Sent from my iPhone using SoCal Jet Boats
-
Here's is my 78 Mach one, you are rite , there was not a lot these boats made. (http://)
-
sorry I was wrong said it went 152.7
Sent from my iPhone using SoCal Jet Boats
152 with 800hp, all the new tunnels are barely running in the 150s with 16-1800hp. That is something I would love to see pics of the motor and time slips.
BECKY WITH THE GOOD HAIR!
-
I have owned 3 of them
-
152 with 800hp, all the new tunnels are barely running in the 150s with 16-1800hp. That is something I would love to see pics of the motor and time slips.
BECKY WITH THE GOOD HAIR!
Don't worry Dennis, you are still number one on the list and in our hearts.
-
152 with 800hp, all the new tunnels are barely running in the 150s with 16-1800hp. That is something I would love to see pics of the motor and time slips.
BECKY WITH THE GOOD HAIR!
just going off what I was told from the owner he has the original article but wouldn't give me it he also has two 1977 gullwing hulls sitting in his backyard never been rigged and their in perfect shape too bad he wouldn't let them go but if he decides to I'll get the first call 😊
Sent from my iPhone using SoCal Jet Boats
-
Here's is my 78 Mach one, you are rite , there was not a lot these boats made. (http://)
i met you at the avi your boat is very nice and it was a pleasure to meet you
Sent from my iPhone using SoCal Jet Boats
-
152 with 800hp, all the new tunnels are barely running in the 150s with 16-1800hp. That is something I would love to see pics of the motor and time slips.
BECKY WITH THE GOOD HAIR!
I agree. I hear the Mach 1 tunnel is a good hull, but anything much over 100 would be a stretch with just 800 hp. Most boats are lucky to see triple digits period on 800hp.....
Should be a sweet boat though, good luck with the build!
Sent from my iPhone using SoCal Jet Boats
-
I agree. I hear the Mach 1 tunnel is a good hull, but anything much over 100 would be a stretch with just 800 hp. Most boats are lucky to see triple digits period on 800hp.....
Should be a sweet boat though, good luck with the build!
Sent from my iPhone using SoCal Jet Boats
Agree there are very nice looking hulls. Should be a great boat build.
BECKY WITH THE GOOD HAIR!
-
ive read the thread about toms boat but the pics where deleted also I was told this boat ran 163 with 800 hp I'm only going to put 550-600 hp in it and I've also heard the bottom was the same as the swtd guess someone sold the mold out the back door from southwind and I was told the top is a regatta just would like to see some setups but I guess there were only a few made as the company was sued over the bottom being a swtd🤔
Sent from my iPhone using SoCal Jet Boats
150's is believable with a bunch... I mean A BUNCH of power... But not with 800hp... Not buying it. Perhaps he meant 105.
Sent from my iPhone using SoCal Jet Boats
-
So apparently it was a blown motor and I'm not believing what they say the mph was I'm just looking for thoughts on how to set it up I've seen most of these are two seats and the motor is forward a lot more then my other jet boats I'm sure it's weight distribution I'm just wondering how far as there is no motor plates with this but I'm going to take my time and do a complete resto and one color gel lots of work to be done to the glass so I might have to drop it off and have that done as I'm not a pro at glass by all means
Sent from my iPhone using SoCal Jet Boats
-
Who cares about projected #'s
Set it up rite, throw as much hp at it that your wallet can handle and enjoy!!!
As for glass work and gel look up fiber composites in Hemet talk t o Joel, they do amazing work
-
Who cares about projected #'s
Set it up rite, throw as much hp at it that your wallet can handle and enjoy!!!
As for glass work and gel look up fiber composites in Hemet talk t o Joel, they do amazing work
yeah I know who Joel is 👍🏻 it will be a fun little project looking forward to it next winter
Sent from my iPhone using SoCal Jet Boats
-
Motor placement from the transom will be directly influenced by the intended power you plan on throwing at it. Bigger power will mean moving the motor forward as compared to moderate power.
Sent from my iPhone using SoCal Jet Boats
-
I have a Mach 1 tunnel hull too. Bitchen boats
Sent from my iPhone using Tapatalk
-
Here's is my 78 Mach one, you are rite , there was not a lot these boats made. (http://)
Clean where the heck were all the Mach 1 guys when I was building mine? Haha
Sent from my iPhone using Tapatalk
-
very nice. maybe see you on the river this year
Sent from my SAMSUNG-SM-G935A using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
I'll be at park moabi or Blythe all summer
Sent from my iPhone using Tapatalk