SoCal Jet Boats

Tech Talk => Hulls => Topic started by: RTriebess on September 19, 2009, 02:26:08 PM

Title: best way to fix a hook
Post by: RTriebess on September 19, 2009, 02:26:08 PM

Looking for the best way to fix a hook in the bottom of the boat.

Title: Re: best way to fix a hook
Post by: cakemoto on September 19, 2009, 03:20:41 PM

I think that would be to blueprint it.I'm guessing

Title: Re: best way to fix a hook
Post by: Luckie Stiff on September 19, 2009, 06:27:22 PM

De-rig the boat, pull everything, and I mean everything out of it.  Build yourself a rolling dolly to set the hull on in the upside down position. Lift it off the trailer, flip it and set it on the dolly.  Get a 6' level (or straight edge) lay it on the hull from the transom forward, start at the centerline of the hull and work outwards, make note of any low/high spots as you do this. If it's low, fill it, if it's high, shave it. Easy as pie.


Here's a great thread on PB, start at post #46
http://www.performanceboats.com/html/forums/showthread.php?t=10678&highlight=dolly&page=2 (http://www.performanceboats.com/html/forums/showthread.php?t=10678&highlight=dolly&page=2)

Title: Re: best way to fix a hook
Post by: MADSKILLZ on September 19, 2009, 06:31:30 PM

Ya send it to Harold at R&D Marine!