SoCal Jet Boats
Tech Talk => Hulls => Topic started by: Cale Thomas on March 01, 2017, 03:01:55 PM
-
I was just curious if any of yall have seen a hull like this .or if you know what manufacturer made it .I am getting close to finishing this project the friend I bought it from said someone had bought a mold from a company .
Sent from my SM-G930V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Looks kind of like a splash of a Carrera Eclipse or a Eliminator Sprint to me
Sent from my iPhone using SoCal Jet Boats
-
maybe Tarva or a Riviera ????
-
I think Jim got it. The deep outside chines are a big clue.
Good looking boat.
http://www.performanceboats.com/jet-boats/43330-rivieara-jet-boat.html (http://www.performanceboats.com/jet-boats/43330-rivieara-jet-boat.html)
-
Thanks,I've been looking on the Web trying to figure out what it is the previous owner removed the rub rail and I assume the hin # got covered in the process
Sent from my SM-G930V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
All the boats I have looked at some far are simular but none have the center line on the bow
Sent from my SM-G930V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Thanks Jim I looked up Riviera and I'm almost certain that's what mine is. The only thing I am curious about is my hull has a slight tunnel hull design?
Sent from my SM-G930V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
A friend of mine has one same thing with small tunnel his is a Rivera
Sent from my iPhone using SoCal Jet Boats
-
This is his sorry it's the only pic I have but it looks just like yours
Sent from my iPhone using SoCal Jet Boats
-
Almost exactly like mine with the exception of the transom on mine has a slope and his has a sharp downturn right behind the engine . My hull also has a je style pump. I sure appreciate all the help and the pictures
Sent from my SM-G930V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Almost exactly like mine with the exception of the transom on mine has a slope and his has a sharp downturn right behind the engine . My hull also has a je style pump. I sure appreciate all the help and the pictures
Sent from my SM-G930V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Sometimes when a guy makes a new mold, they'll make subtle differences.
But, essentially the same hull. As long as it was laid up well. :thumbup:
-
Mine looks kinda like yours, and it's a 79 Hornet.
Sent from my iPhone using SoCal Jet Boats
-
Looks exactly like my 85 commander. mine had an outboard though. I had major stress problems with the hull with lead to a crack along a strake twice in the same spot. almost sank both times. Eventually stripped it and scrapped the hull. yours looks a lot cleaner then mine did, thats for sure ;D