SoCal Jet Boats

Tech Talk => Hulls => Topic started by: Blown R/T on December 07, 2013, 12:46:38 PM

Title: Looking for any suggestions and advise
Post by: Blown R/T on December 07, 2013, 12:46:38 PM

Hey guys, new the forum and just picked up my 1st real boat (technically 2nd but I only took my 1st one out once then sold it so I don't really count that)...  I picked up a '74 18' Rogers with a built 400 Pontiac and Berkeley pump.  I am in need of a set of snails for Nicson logs or interested in switching over to OT headers but can seem to find any for a 400 Pontiac.  Any help is greatly appreciated, thanks in advance!

Dustin



Sent from my iPhone using SoCalJetBoats

Title: Re: Looking for any suggestions and advise
Post by: crewchief22 on December 07, 2013, 07:04:09 PM

Glenwood Marine has a set of manifolds for the Pontiac 389-421-455.  I can't remember if the 400 was the same port configuration.

http://www.glenwoodmarine.net/Catalog/MANIFOLDS.pdf (http://www.glenwoodmarine.net/Catalog/MANIFOLDS.pdf)

Good luck

Title: Re: Looking for any suggestions and advise
Post by: rush1 on December 07, 2013, 07:32:44 PM

Yep it will work just fine

Sent from my SCH-I545 using SoCalJetBoats mobile app

Title: Re: Looking for any suggestions and advise
Post by: crewchief22 on December 07, 2013, 07:34:01 PM

Quote from: rush1 on December 07, 2013, 07:32:44 PM

Yep it will work just fine

Sent from my SCH-I545 using SoCalJetBoats mobile app

I thought so, but it's been years since I helped out on a Pontiac.

Title: Re: Looking for any suggestions and advise
Post by: rush1 on December 07, 2013, 08:03:22 PM

They'll work on 326 also

Sent from my SCH-I545 using SoCalJetBoats mobile app