SoCal Jet Boats

Tech Talk => Hulls => Topic started by: Sicaz66 on April 07, 2015, 06:20:18 PM

Title: Rpm (aka Reese Performance Marine)
Post by: Sicaz66 on April 07, 2015, 06:20:18 PM

Anyone heard of these boats? They any good? Made  from 99'-2004 by Dennis Reese. Can't find any info?

Title: Re: Rpm (aka Reese Performance Marine)
Post by: Sicaz66 on April 11, 2015, 06:28:32 AM

My research has found it to be from the original placecraft mold.Are the placeraft boats
decent hulls?

Title: Re: Rpm (aka Reese Performance Marine)
Post by: bbfsouthwind on April 12, 2015, 04:45:27 PM

Eliminators are good hulls


Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Rpm (aka Reese Performance Marine)
Post by: Sicaz66 on May 03, 2015, 07:58:37 AM

I found out it is defiantly from a  placecraft mold. not an eliminator. Looks exactly like ithe 21' sport. 8)

Title: Re: Rpm (aka Reese Performance Marine)
Post by: Sicaz66 on February 19, 2017, 07:19:23 AM

Hoping to get this float into the 80's with my 650hp stroker 496, and a built pump with stainless a/b cut.

Title: Re: Rpm (aka Reese Performance Marine)
Post by: JordanDangerfield on February 19, 2017, 08:28:25 AM

That's a lot of boat to move. 650 would only get an 18' boat into that speed range. You're going to need a little more than that. Cool boat!


Sent from my iPhone using SoCal Jet Boats

Title: Re: Rpm (aka Reese Performance Marine)
Post by: Sicaz66 on February 19, 2017, 08:45:32 AM

Pipe dreams.... Same motor in my waay bigger,  heavier,  boat does 70 now ( on gps)with stock pump with alum A , and diverter... I'm sure this boat is at least 500lbs lighter. And a built berk with all the goodies..setback, detailed and blueprinted bowl, diverter, shoe, ride plate,inducer, stainless A/B cut, AQ shaft, loader, and possibly stuffer?...is 10 more mph too much to expect?
Plan to squeeze a 150-200 shot on the bottle.....

Title: Re: Rpm (aka Reese Performance Marine)
Post by: Sicaz66 on February 21, 2017, 07:16:21 AM

Called placecraft.. Explained the setup I plan on running... Said they are seeing 90mph with similar setup... ;D :screwy: :sly: :beer:

Title: Re: Rpm (aka Reese Performance Marine)
Post by: placecraft jess on February 21, 2017, 01:09:46 PM

This is mine 94 place craft 454 177 blower shoe ride plat don't know anything about the Berkeley pump was told it had an A impeller when I got it the best if seen so far was 72 on gps about 5200 rpm just me in the boat


Sent from my iPhone using SoCal Jet Boats

Title: Re: Rpm (aka Reese Performance Marine)
Post by: Sicaz66 on February 21, 2017, 03:29:14 PM

Quote from: placecraft jess on February 21, 2017, 01:09:46 PM

This is mine 94 place craft 454 177 blower shoe ride plat don't know anything about the Berkeley pump was told it had an A impeller when I got it the best if seen so far was 72 on gps about 5200 rpm just me in the boat


Sent from my iPhone using SoCal Jet Boats

Nice! What kind of power do you think you are making?

Title: Re: Rpm (aka Reese Performance Marine)
Post by: placecraft jess on February 21, 2017, 04:56:32 PM

Quote from: Sicaz66 on February 21, 2017, 03:29:14 PM

Nice! What kind of power do you think you are making?

thanks I'm not sure right around 500 best guess


Sent from my iPhone using SoCal Jet Boats