SoCal Jet Boats
Tech Talk => Hulls => Topic started by: Horizonjet on September 07, 2010, 06:48:30 AM
-
Anybody use any differant transom block offs where the exhaust used to go thru? I seen the ones you can buy for 100 bucks but there has to be something differant. any suggestions? ???
-
Home Depot has a 2, 3 ,4 inch plug for pipe, to close the hole, not ugly but not show.
-
Cool, Thanks...I never would have thought aboutl looking there.
-
i have seen people leave about 2" of the exhaust hose on the inside end of the tips and use a PVC type plug to cap it off. kinda looks funny if you have O/T's and through transom tips, but it works.
-
Oh yea, that would work too. I dont know why I did not come up with these ideas also....Maybe its an age thing or too many of these :beer:
-
With a little work , some resin , glass and plywood you can fill them nicely too heres some we did last month ! Tom
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Fgabemiller%2FDSC09173.jpg&hash=211c9947bc46a4fbba1916c64a67c5bd9bb79a01)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Fgabemiller%2FDSC09298.jpg&hash=0c79ca113dd119c1d905da36bbb006e86c84d358)
-
I have some block off plates that seal up with o rings I would sell for 20 plus shipping. They just need a little clean up. Pm me if ur interested.