SoCal Jet Boats
Tech Talk => Interior => Topic started by: 93_ultra on May 07, 2014, 12:38:19 PM
-
I need some gas struts for my engine hatch but don't know how strong I need them. Its a big hatch. Anyone know what strength?
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
I got a set for my brother In law and we matched them to the ones off my tonnue cover from my truck since they can handle weight.... I know Eddie at Martinez marine has some at the shop in corona. Not sure the price. My brother in law spent like 45/50 bucks for his.
SRC
Sent from my iPhone 5 using SoCalJetBoats mobile app
-
you need to measure how much force is needed to push the hatch up at their mounting point and then divide by 2... then add a few lbs for good measure in case the hatch foam gets wet.
-
I had 50lbs first and if a wake rolled by it would shut... I have 80lbs on now and are a bit more needed but shuts fine. The reason was the placement of them. Wanted them as far back as possible for the ease of coolers/stuff ect. Bought mine on ebay for like 20 each or less. You dont need anything fancy like the word marine in them if its river use.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi897.photobucket.com%2Falbums%2Fac178%2F2ndlight%2Fym950_zps0e8c0e69.jpg&hash=bd05bb40395bc86607fdf88bb6e1022e92e538e1)
-
I got mine at napa in corona $30.00 80lb shocks works perfect.
-
You check with eddie at martinez?
-
I have an extra set of brand new short ones. I'll check and see if I can find the weight rating on them if ur interested.?.
Sent from my iPhone using SoCalJetBoats mobile app