SoCal Jet Boats

Tech Talk => Interior => Topic started by: 78centurian on April 02, 2009, 08:24:54 AM

Title: seat frames?????
Post by: 78centurian on April 02, 2009, 08:24:54 AM

how would you go about making new front bucket seat frames???

Title: Re: seat frames?????
Post by: marty722 on April 02, 2009, 08:53:52 AM

get some wood and a saw, that should be a good start......????


Just kidding.

What I did with my old seats was take them apart peice by peice and copy the cuts and start by using wood glue to keep them together. The when finished you can either glass them or screw them together. I kow that there are alot of other opinions out there but thats what worked for me. If you don't have the old seats good luck.....

Title: Re: seat frames?????
Post by: 78centurian on April 02, 2009, 10:54:36 AM

YEA THATS WHAT I WAS THINKING TO DO...I HAVE THE OLD SEATS BUT THE BOTTOMS OF NTHEM ARE ROTTED OUT SO I NEED TO RE DO THEM

Title: Re: seat frames?????
Post by: marty722 on April 02, 2009, 03:30:00 PM

I had to take a good guess at some of the area's, as long as you get close enough you should be ok..

Title: Re: seat frames?????
Post by: Donjuan on April 02, 2009, 03:35:02 PM

You should ckeck out Skips thread on fiber glass seats. Thats the way I wish I would have went.

Title: Re: seat frames?????
Post by: beerjet on April 04, 2009, 11:20:53 AM

Quote from: Donjuan on April 02, 2009, 03:35:02 PM

You should ckeck out Skips thread on fiber glass seats. Thats the way I wish I would have went.

Yes .....

-beerjet-