Could someone who has cocktail seating please do me a huge favor??

I'm looking for a couple of measurements for the front buckets:

inside dimensions
overall width/depth/height.

Pictures to go with the measurements would be GREATLY appreciated, but not necessary.

Thanks

Their boat might be different then yours so the measurements they give may not fit yours


Sent from my iPhone using SoCal Jet Boats

If I was doing a bench seat that would be an accurate statement.  All I'm looking for is the width and depth of a single front bucket, the other seats don't matter at this time, I will tailor the back seats to fit the length I have once my front is built and the distance between the seats will be what it will be.   

With cocktail seating I should be able to make two separate seats and install them in whatever boat I want(as long as the length is adequate) and it shouldn't matter how wide the boat is(as long as it as least as wide as the two seats together).

By my figuring the seating portion should be ~18 - 20", with 3" thick sides on either side that would make my overall seat width ~24 - 26".

If my boat is 72" wide inside that would leave me a ~20" isle, if my boat is 60" wide inside it would leave me ~8". 

I would go with what feels good when I sit down
If you google jet boat buckets seats. Overton.  Wholesale marine has generic buckets that are about the same with dimensions.  There’s plenty to pick with sizes.   


Sent from my iPhone using SoCal Jet Boats mobile app

Cool, thanks for the info.

I got the biggest base I could comfortably fit in the boat cut and mocked in yesterday.  It comes out to ~24" overall.  That leaves me with an 18" interior seat dimension.  Maybe I need to go to bass pro or cabella's and sit in a few to see what width(s) are comfortable.