SoCal Jet Boats
Tech Talk => Interior => Topic started by: 76NORDIC on December 19, 2007, 01:39:29 PM
-
Thot I had seen a thread when I was lurkin on HB, but thats out the window. Does anyone know where they sell em? Im lookin to get on for my 76 Nordic. One other question I had was does anyone know if the early Nordics came with the metal nordic insignias on the sides, thot I saw a pic with them about a year ago but dont remember where
-
You can get a splash guard made from Rodger Finney at Finney Plastics in havasu. He is a good friend of mine. He Probably has the mold for one already. If not he can still make you one.
-
question is something like that $$$$$. or $ ????
-
hey cj have a number to call and maybe a roundabout $ for one Thanks for the help bud
-
http://finneys.com/specialize.htm
-
hey 76 my nordic is an 80 and it does have the metal badges
-
76,
Here is a pic of my splash guard. I guess the previous owner put a hole in it for the bilge hose. I will TIG that up in the Spring maybe. I also want the badges like 1980Nordic has. My boat has the indents for them too.
T.J.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.tjsperformance.com%2Fimages%2Fnordic82.JPG&hash=ef47e7fdf16b3d07af8bbb8167ac42bfbe2f0341)
-
Have any idea where we might find them? Or anyone else????
-
what the hell call Nordic....ya never know.......stranger things have happened..... :o
-
there was a old thread on hotboat where someone suggested a marine shipwreck yard up in norcal....someone said he has boxes of emblems.....but i cant remember the name of the shop.
might also call jim brock at cyclone speed and marine...hes got a whole ton of stuff.
-
yea sorry guys no luck on the badges if they were glued on i would hook you guys up one for each of you but since they screw into the hull i dont want holes ya know usually everything i own i debadge any vehicle and whatever else into that clean look but like i said holes exhist something has to go there......however i tend to run into alot of stuff so i'll tell ya if i run into something
-
Yesterday I went by Finnely's here in Havasu to see about splash Guards....let's put it this way....I had to pull the shorts out of my ass after he told me it would cost 350 bucks........F that....I'll freakin make my own.....I can imagine what his powder coating costs.....
-
Yesterday I went by Finnely's here in Havasu to see about splash Guards....let's put it this way....I had to pull the shorts out of my ass after he told me it would cost 350 bucks........F that....I'll freakin make my own.....I can imagine what his powder coating costs.....
I think thats a reasonable price for custom plastic work.
-
Really? I thought it would have been more like 150 to 200
-
i got mine from bergeron engineering out in mesa (az), it has been a couple of years ago, but it was only like $100.00 +- a little, that was for the plastic one in the smoked color
-
well he did say that he didn't have a templete for the Miller so he'd have to make it on the boat....but the price was said before he asked what kind of boat it was....he didn't seem too interrested in making it....A place in Mesa eh? hmm
-
Bergeron Engineering
1559 n Country Club
Mesa, Az 85201-2513
480-834-1531
The one i got was kinda a universal fit??, no holes drilled or anything and flat, i had to clamp it to the boat, make the bends and drill the mounting holes, not very hard to do at all, it was nice though because i could decide how high i wanted it to go, it fits very nice except in the corners, there is just a small gap, not noticable unless you look straight down at it and it does not allow very much water to enter there. i would buy the same thing again :)
-
I sell my custom make and fit splash guards for 450, but was giving Al a deal. I don't have to justify my pricing to anyone, but if you are looking for a cheap deal I have a flat fit most 1/8 lexan for 100.00. Rodger Finney, Finney Plastics and Powder coating, Lake Havasu
-
I sell my custom make and fit splash guards for 450, but was giving Al a deal. I don't have to justify my pricing to anyone, but if you are looking for a cheap deal I have a flat fit most 1/8 lexan for 100.00. Rodger Finney, Finney Plastics and Powder coating, Lake Havasu
I need to get with you about clear powder coating my new engine mounts ;D
2sav
-
call me @ 680-6646 during the day, Rodger
-
Roger and David have done some real nice work for me, they are who I use for all my powder coating here in the Mohave County Area !
-
Rodger has done alot of parts for all my dads projects and he has done great work!
-
Try L&L Marine in Corona Ca.
www.llmarine.com the link at the top right for windshields will get you there
-
I sell my custom make and fit splash guards for 450, but was giving Al a deal. I don't have to justify my pricing to anyone, but if you are looking for a cheap deal I have a flat fit most 1/8 lexan for 100.00. Rodger Finney, Finney Plastics and Powder coating, Lake Havasu
When I came to you I hadn't looked around and have checked around after that for custom fit guards....I posted something that I shouldn't have...I have also seen 2 of your custom guards and it is very good work....and I now know that your price is a good one....my head is hanging in shame.....I have learned a lesson....
-
did you try this??
http://www.llmarine.com/content/llmarine/boatwindow.htm
-
Got my splash guard from Bergeron in AZ. came with the ss bolts washers and lock nuts, also came with machined aluminum washers {nice} also. Was real easy to install too.
-
that place in nor cal is called shipwreck marine phone #1-916-635-1945
-
Sweet!! Thanks for the info, will give em a call in the am ;D
-
that place in nor cal is called shipwreck marine phone #1-916-635-1945
On the web at http://www.shipwreckusedparts.com/