SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: lupo1904 on June 08, 2015, 05:51:02 PM
-
Anyone ever run one of these boats with out a full droop and with a full droop? Gains?
Sent from my iPhone using SoCal Jet Boats
-
Dominator, has a shoe and ride plate to sick to go out and put a angle finder on it and check shoe depth but it does porpoise some with diveter half way up and all the way up
Sent from my iPhone using SoCal Jet Boats
-
Dominator, has a shoe and ride plate to sick to go out and put a angle finder on it and check shoe depth but it does porpoise some with diveter half way up and all the way up
Sent from my iPhone using SoCal Jet Boats
. It's a pretty boat just hang on you be alright. I have heard of other people complaining about this issue with this hull. However I don't know the fix. Sorry Lupo still a pretty boat.
Sent from my iPhone using SoCal Jet Boats
-
Most of the Rogers 18' circle boats run a full droop. The whole idea is to set on the tail. I would imagine the weight of the open bow wants to push the nose down. The droop may be the answer to picking the nose up. Where's the ride plate set?
-
Most of the Rogers 18' circle boats run a full droop. The whole idea is to set on the tail. I would imagine the weight of the open bow wants to push the nose down. The droop may be the answer to picking the nose up. Where's the ride plate set?
been sick for a few days now and haven't checked, but it looks to be jacked up pretty high. It carries the nose which seems to be to much to me. Witch is keeping me to think plate angle is gunna be a lot. I'll get out there and check tomorrow
Sent from my iPhone using SoCal Jet Boats
-
5.6 degrees of ride plate, hope this helps me with some input on this thing
Sent from my iPhone using SoCal Jet Boats
-
5.6 degrees of ride plate, hope this helps me with some input on this thing
Sent from my iPhone using SoCal Jet Boats
. Lupo when Dennis had his I think he talked to Jim Brock and got some info on ride plate.
Sent from my iPhone using SoCal Jet Boats
-
Thanks Jim I will pm him
Sent from my iPhone using SoCal Jet Boats
-
I only have an hour or so of experience, But i have dennis's old boat.
It now has a JC pump and still a rideplate and the same shoe. Im running a 20" long ride plate with a Stock JC (needed to be longer to fit with the bowl)
I set it at right about 4.5* and it seemed to work well. Popped right up and on it, and only porpoised a little bit at about 3k rpm, but very little.
At 6k it was dead smooth, til the engine let go
-
Thanks, I guess I will just start playing with it friday
Sent from my iPhone using SoCal Jet Boats
-
drop it to 3.5 and see what that does. If you like it drop a little more. The bottom in the Cyclone is straight and the newer hulls have a break bottom so they will set back on the tail.
-
drop it to 3.5 and see what that does. If you like it drop a little more. The bottom in the Cyclone is straight and the newer hulls have a break bottom so they will set back on the tail.
thanks will start there
Sent from my iPhone using SoCal Jet Boats