SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: 2savage4you on February 08, 2008, 05:45:57 AM
-
I have a new Energizer on my WJ Jaccuzi pump and want to know if a Berkeley droop will bolt up to it and also a Place diverter...... I think someone told me it would...But i want to make sure before i buy it.. ;)
2sav
-
The droop and place diverter will bolt up. Your probably going to need a steering extention and a pivot(posibly a spacer, not alot of up down movment in the steer tube). The forward reverse hiem joint will most likely need to be converted to the smaller 10/32 thread, and the arm will have to be drilled or threaded for the Turbine cable adapter. Or the better way to do it would be to switch over to the 43bc cable.
-
Well maybe i should just leave it alone for now cause thats sound like a whole new project :banghead:
Nothins ever easy is it :mad:
2sav ;D
-
I may have made it sound more complicated than it is, truthfully a side from needing a hiem joint for the cable, it's not much more work than putting a droop on anything else. Don't shy away from it, you can do it.
-
Well then when im ready i will order everything through you guy's and then go from there ;)
Thanks ;D
2sav
-
What boat is that in your avatar 2sav?
-
What boat is that in your avatar 2sav?
Thats the problem child ;D (Omega)
2sav