SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Nos2Fly on April 10, 2016, 05:42:20 PM
-
Hey guys,
I'm pretty new to the jet scene and I'd like to see if I can find some maintenance info for my setup. I've done the Google thing and have poked around on AT's website. I can't find anything that deals with my particular model. The AT-309 is the most similar pump to what I am running. What I know about the pump is its a model AT/S with option A / HTR. I know the pump was recently gone through and has a bronze A cut impeller, stainless shaft and a B1 loader.
From what I've figured out, the pump runs dry with only grease around the packing bearing and the tail bearing. Is this correct? There is no oil in it like a Berkeley pump, correct? So it's just grease the two points and call it good?
Sent from my iPad using SoCal Jet Boats
-
Correct on the grease. No oil in this pump.
-
Awesome! Thanks Brian.
Sent from Planet Earth using SoCal Jet Boats