SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: TPayne366 on June 24, 2010, 11:08:20 AM
-
How difficult is it to R and I and wear ring on an American Turbine? I am what I would consider to be mechanically inclined but dont want to get into something way over my head.
-
How difficult is it to R and I and wear ring on an American Turbine? I am what I would consider to be mechanically inclined but dont want to get into something way over my head.
relatively simple and also fairly inexpensive these pumps are nearly Identicle to Berks , good info on AT site as well as help from here Call if we can help you Tom
-
Just did mine yesterday. Heat the wear ring up with a propane torch just as rubber liner starts to smoke, and pull out with bent screwdriver as stated on American Turbine website. I was surprised that it was so easy. I disassembled my pump completely in about two hours including thorough cleaning ready to be reassembled. This was my first time attempting to do this, it is very simple. Good luck and take your time.
Pat