SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Brad @ SCJB on February 05, 2008, 10:18:56 PM
-
I picked it up off ebay awhile ago and its been sitting on a shelf in my garage....i've tried to describe it to a few people and they were unsure.
its obviously a race nozzle of some sort.....but its not the typical berkeley one. It is longer and doesnt have the mount for the rudder. its about 8" long and has a casting number on it of "L-2847"
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
i figure its some knock off of the berkeley race nozzle.
-
The part number looks like its berkeley, My guess would be that it's the original staight snoot. ;D
-
Looks like a stepped snerplewizzinator with a flarery outy endy thing. ;D
Just my opinion. LOL Short potato gun? Butt trumpet? :-\
-
Looks like a stepped snerplewizzinator with a flarery outy endy thing. ;D
Just my opinion. LOL Short potato gun? Butt trumpet? :-\
...and if used properly, it can be a AA/Paul silencer ;) >:D
-
LOL!!! O0
-
My guess is that someone added the long piece on the end of a standard race nozzle . The end peice looks like it's about the same thickness as the FTN inserts . Strip the paint and see if it's actually two pieces or if it's one cast part , that would be cool . Odds are it's some prototype part off Rasberry :D.
-beerjet-
-
beerjet is half right, someone added the round tubing on the end, part # L-2847 is a old standard nozzle housing from a early berkeley, that was cut off and the tubing welded on, Jim
-
beerjet is half right, someone added the round tubing on the end, part # L-2847 is a old standard nozzle housing from a early berkeley, that was cut off and the tubing welded on, Jim
Are those the nozzles on the JB pumps ?
-beerjet-
-
... Odds are it's some prototype part off Rasberry :D.
-beerjet-
yep
-
yep
nope....
came from a guy in georgia.