SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: jimpen on May 15, 2014, 07:16:46 AM
-
I have a Bassett T with a panther pump and have problems. I have changed the Bassett T and adjusted the ball valve trying all my options. I'm not sure if this is just how the panther pump works. I get no water till 2500 rpm and moving15mph. Bassett says when at idle in a no wake zone for extended periods rev it up from time to time to get water to the headers. This will not work even at 4500 rpm need help please. :banghead:
-
Do you have a pressure gauge anywhere?
Sent with my Fingers
-
No pressure gauge
-
put a valve on the exit line and start to close untill water comes out headers at about 1800 rpm
-
I've done that just more water when it finally opens. I think it doesn't build pressure like the Berk's do.
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
panther is a low pressure high volume pump unlike the berks... id skip the T and run a ball valve next to your seat to control your headers.
-
Has anyone ever ran a Bassett T with a Panther pump. Does any body make a tee that is adjustable that would work with the Panther pump.
-
I've got a set up for sale
Sent with my Fingers
-
Are you running it dry with a garden hose? I couldn't get much through the headers on land but works fine in the water
-
Scratch that, I just re read ur post
-
How much for your setup
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
$120 picked up
Sent with my Fingers
-
Were you at
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
Costa Mesa, but heading to Laughlin tomorrow
Sent with my Fingers
-
Give a call when you get back and I will take it. 951-741-8790
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
Let me know when would be a good time to pick up the water lines. I will be in Orange this Friday.