SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: Patch on July 30, 2013, 09:21:47 AM

Title: bowl interchange
Post by: Patch on July 30, 2013, 09:21:47 AM

Will a Berkley bowl interchange with an American Turbine AT-309 bowl. I t!oasted mine this weekend. Wear ring is loose with new insulator and the vanes are pretty jacked up. I dont have any picks. Want to find a resonable replacement to get back on the water.

Title: Re: bowl interchange
Post by: Patch on July 30, 2013, 09:56:15 AM

I should of proof read last post. The wear ring will slip in and out very easily with new insulator into suction housing. I can push it in and out by hand. is there a cure for this condition? Or am I screwed. My  bowl is still jacked and in need of a replacement.

Title: Re: bowl interchange
Post by: SoCalPSD on July 30, 2013, 10:41:14 AM

What kind of Berkeley bowl you looking for. C bowl or split bowl?

Title: Re: bowl interchange
Post by: Patch on July 30, 2013, 10:50:28 AM

A split if everything is a direct change over.

Title: Re: bowl interchange
Post by: santeerob619 on July 30, 2013, 10:51:48 AM

I have a c bowl that I would let go of for pretty cheap.

Sent from my DROID RAZR HD using SoCalJetBoats mobile app

Title: Re: bowl interchange
Post by: Patch on July 30, 2013, 07:08:51 PM

Are Berkeley bowls interchangeable with AT?

Title: Re: bowl interchange
Post by: santeerob619 on July 30, 2013, 07:51:08 PM

I think so? It might tell you on the Berkeley website?

Sent from my DROID RAZR HD using SoCalJetBoats mobile app

Title: Re: bowl interchange
Post by: lbhsbz on July 30, 2013, 08:20:02 PM

The wear ring is in the suction housing, not the bowl. 

The AT bowl will bolt to a berk suction, but the OD is larger and you'll need a different transom adapter