SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: bahner80 on September 05, 2017, 03:37:32 PM
-
So I got about 6 hours on the pump .
Dominator 12s suction housing /inducer
Berkeley bowl and droop
Place diverter.
Motor and pump are both fresh ,been taking it easy this summer and both haven't seen wot throttle (its been hard)
Noticed this gasket rearing it's head last run out @ parker.
Oh it's got an A impeller,
Curious if anyone has had this problem before
-
Anyone?
-
Had same issue bolts were slightly loose so it pushed gasket out. Make sure surfaces clean and flat then replace gasket and tighten. Re tighten after running it a couple of hours
Sent from my iPhone using SoCal Jet Boats
-
Already checked all bolts. That was my first thought and we're all tight gonna replace gasket tonight.thinking maybe bolts are a lil too long .
We'll see when I pull it apart.good time to grease the bearing also.
Thanx