SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: The Chaz on April 23, 2008, 08:19:37 AM

Title: Disassembly
Post by: The Chaz on April 23, 2008, 08:19:37 AM

How do I get the pins that hold the turning/reverse gate bucket out?  One came right out, is there a trick if one is stuck?
[attachimg=#1]

Title: Re: Disassembly
Post by: 2savage4you on April 23, 2008, 08:36:46 AM

If ya got the bolt out of it , i use the other pin and knock it through ;D
2sav

Title: Re: Disassembly
Post by: hotrod56cars on April 23, 2008, 08:39:48 AM

I can't remember which pin it was, but I definately remember one of the pins only coming out in one direction.   ???

Title: Re: Disassembly
Post by: GAWnCA on April 23, 2008, 09:23:26 AM

Quote from: The Chaz on April 23, 2008, 08:19:37 AM

How do I get the pins that hold the turning/reverse gate bucket out?  One came right out, is there a trick if one is stuck?
(Attachment Link)

I think you have a set screw/bolt just to the right of your red arrow that screws into that pin.

Title: Re: Disassembly
Post by: The Chaz on April 23, 2008, 10:55:47 AM

Thanks,  I got them all out now.  Just a little pounding >:D