SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: beerjet on November 28, 2008, 11:39:14 PM
-
My Hallett has a hydraulic diverter kit and the POS plastic mounting bracket is GONE ! So is the cover . Actually when I was screwing the cover onto the pump , I snapped the stem that the cover screws to . Needless to say , my diverter stops working halfways through all of my boat trips because it's upside down in the bilge :mad: Any ideas ???
-beerjet-
-
You can buy these parts individually from Bennet, in fact I have to get some for mine, I'll order two of each, should have it in a week or two... ;)
What's the number on your pump? 351?
Check it out.. http://www.bennetttrimtabs.com/parts.php?cID=7
GT
-
I'll check the number on my pump tomorrow .
I need 5-6-8 but they dont sell direct :mad:
-beerjet-
-
when i called them and told them i needed a cover and mounting bracket they sent them to me for free.
-
i have mine inside a small battery box mounted to the stringer
-
i have mine inside a small battery box mounted to the stringer
I dont think I even have that much room back there .
Thanks Ralph , my friend works down in La Habra so I'll see if they'll let him pick them up .
-beerjet-
-
I can get any Bennet part made...Still have an account ;D
Lemme know I'm going to order some stuff for the Carrera on Tues.
GT
-
I need 5-6-8
-beerjet-
;D
-beerjet-
-
10-4 ;D
GT
-
I dont think I even have that much room back there .
Thanks Ralph , my friend works down in La Habra so I'll see if they'll let him pick them up .
-beerjet-
i dont know about la habro, my shit came from florida ??? i think :-\
-
This is the main reason i went with the manual and ditched the hydraulics.
I dont want problems , that would just be one more reason my boat wont get wet ;D
-
i dont know about la habro, my shit came from florida ??? i think :-\
well PLace is in La Habra , he probably dont got any of the hydro pump shit there .
This is the main reason i went with the manual and ditched the hydraulics.
I dont want problems , that would just be one more reason my boat wont get wet ;D
I thought about the manuel but there was no room on the floor for a lever . One too many boat sodas and I'll have every toe on my feet broken too :screwy:
-beerjet-
-
well PLace is in La Habra , he probably dont got any of the hydro pump shit there .
I thought about the manuel but there was no room on the floor for a lever . One too many boat sodas and I'll have every toe on my feet broken too :screwy:
-beerjet-
didn't get my parts from place, i got them from bennett, the company who makes the pumps
http://www.bennetttrimtabs.com/ (http://www.bennetttrimtabs.com/)
-
I have "dozens" of the Plexy covers (just ran a bunch thru the dish washer ;D) and a few of the "dove tail" mounts send me your addy again and they'll be on your doorstep ! Santa
-
I have "dozens" of the Plexy covers (just ran a bunch thru the dish washer ;D) and a few of the "dove tail" mounts send me your addy again and they'll be on your doorstep ! Santa
Tom, How many used hydraulic systems do you have laying around? Greg
-
Greg , just saw this post , I have a complete used PD hydraulic unit on the shelf if your interested Tom
-
Greg , just saw this post , I have a complete used PD hydraulic unit on the shelf if your interested Tom
I just sent you email! ;D