SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Grimpala on March 09, 2021, 07:55:34 PM
-
I currently have an original style berkeley nozzle, I'm in the process of installing a diverter. What cable/fitting an I needing to mount my reverse cable to the new control arm?
Sent from my SM-G975U using Tapatalk
-
FWIW. The current reverse cable is a 43BC, can I simply turn it around and then fab up a new mount/bracket at the reverse handle?
Sent from my SM-G975U using Tapatalk
-
You want a 1/4-28 heim end.
https://www.cpperformance.com/p-896-14-28-heim-end.aspx
Sent from my Pixel 3 XL using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
You want a 1/4-28 heim end.
https://www.cpperformance.com/p-896-14-28-heim-end.aspx
Sent from my Pixel 3 XL using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Copy, but how do I secure the cable to the upper part of the bracket? On my old setup there was a small saddle clamp to capture the cable, on the new setup it's a large dia. hole.
Sent from my SM-G975U using Tapatalk
-
This one is of Brads boat.
Look at the cable attachment point above the reverse gate.
https://www.socaljetboats.com/jet-pumps/place-diverter-rebuild/?action=dlattach;attach=51855;image
That's a 43bc cable.
Your diverter handle should use the end you have in your hand.
Dan'l
-
You need to buy a 43BC cable, you now have a 43c cable, no way to mount it, 43 BC put thru the hole on the arm with a nut on top and bottom and tighten
-
You need to buy a 43BC cable, you now have a 43c cable, no way to mount it, 43 BC put thru the hole on the arm with a nut on top and bottom and tighten
Good catch.
Sent from my Pixel 3 XL using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Thanks for the info guys. It is a 43BC cable, the end with the threads/nuts on it is bolted to a bracket at the reverse handle. I need to fab a new bracket to hold the end in my picture, and then I can assemble/install such as the diverter in the link Mash On It provided.