Tech Talk => Jet Pumps => Topic started by: schick on March 07, 2009, 05:16:22 PM
Title: Dominator bowl
Post by: schick on March 07, 2009, 05:16:22 PM
I this old style dominator bowl. I hear they need some work to make them flow like the new style. Or flow better. Can anyone tell me whats done to them? Thanks, schick
Title: Re: Dominator bowl
Post by: jet boat performance on March 07, 2009, 07:47:29 PM
Ya need to "Open up that Exit " a little (I dont have the spec here) and Thin out the exit vanes (not "razor" ) also clean up the entrance on the other side Tom
Title: Re: Dominator bowl
Post by: LBsuperjet on March 07, 2009, 11:01:01 PM
yeah if thats the 'water lubed' one, i have the same bowl...12S...hey tom, do you do the intake/exit work on them? if so, how much? ill send it to ya.
Reid
Title: Re: Dominator bowl
Post by: beerjet on March 14, 2009, 03:13:04 PM
Your right Tom, that exit hole sure looks small.
-beerjet-
Title: Re: Dominator bowl
Post by: walshmotorsports on April 20, 2009, 03:00:18 PM
What area are you talking about "open up the exit area"? I have this pump too and was wondering what area...Thanks!
Title: Re: Dominator bowl
Post by: LBsuperjet on April 20, 2009, 04:53:39 PM
the 'exit area' is the back or small part of the bowl...meaning open it up a bit, make the hole a little larger w/ machining.