SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: koby686 on April 16, 2016, 03:43:35 PM
-
Can I swap out my Electric Jetovator to a manual one by swapping out to a longer cable and buying a trim
handle while still using the same nosell? If so does Anyone have pics or links to what I need. Thanks in advance.
Sent from my iPhone using SoCal Jet Boats
-
Can I swap out my Electric Jetovator to a manual one by swapping out to a longer cable and buying a trim
handle while still using the same nosell? If so does Anyone have pics or links to what I need. Thanks in advance.
Sent from my iPhone using SoCal Jet Boats
Is it a jetovator or Place diverter?
I have seen one jetovator that had a manual cable and handle.
Early Place diverters could have an electric motor/cable system works decent.
Post some pics up.
Dan'l
-
It's a Jetovator here are some pics
Sent from my iPhone using SoCal Jet Boats
-
Anyone?
Sent from my iPhone using SoCal Jet Boats
-
It can be done, don't have any pictures, the one we did we used a Trimetric cavitation plate control.
-
I just took a manual Jetovator set up off of my boat. The brackets appear to be home made, but it worked. Let me know if you need any more pictures.
Sent from my iPhone using SoCal Jet Boats
-
I just took a manual Jetovator set up off of my boat. The brackets appear to be home made, but it worked. Let me know if you need any more pictures.
Sent from my iPhone using SoCal Jet Boats
That is an old Hallcraft plate control, not too far off from a Trimetric.
GT
-
That is an old Hallcraft plate control, not too far off from a Trimetric.
GT
All I know about it is that it's HEAVY. Pretty cool old piece though
Sent from my iPhone using SoCal Jet Boats