SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: TCRUSH on July 23, 2009, 09:44:32 AM

Title: Greasing PTO shaft?
Post by: TCRUSH on July 23, 2009, 09:44:32 AM

I was wondering if you guys grease the inside of the coupler that goes over the PTO shaft? Their is no grease zerks and it's completely dry. Seems those parts rubbing together all the time should be greased. Please give me your input. I was thinking of putting the needle tip on the grease gun and squirting in the splines. Thanks   TC

Title: Re: Greasing PTO shaft?
Post by: SLCKREG on July 23, 2009, 10:17:51 AM

Anti seize....

Title: Re: Greasing PTO shaft?
Post by: Stevecat on July 23, 2009, 11:06:12 AM

Yes I put some grease on the splines.

Title: Re: Greasing PTO shaft?
Post by: GT Jets on July 23, 2009, 06:11:21 PM

Spline grease, extreme pressure lithium based smae crap used on 4X4's ddriveshafts...make sure there is a hole in the yoke somewhere otherwise could hydraulic and either wont get it all the way on or off.....

GT