SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Tomanyprojectz on June 23, 2012, 03:33:25 PM
-
whats up guys, i attached some pictures below... what do i need to do to make a hardline/pipe for the fitting through the transom from pump to attach my gate valve onto? im trying to install a gate valve and i need a solid pipe to install it on. any way to install the pipe onto the fitting i already have? trying to get the boat in the water by next weekend[attachimg=1][attachimg=2][attachimg=3]
-
I don't think you'll be able to hardline to that fitting. You could run a short connnector hose to a gate valve that is equipped with a hose barb on one side then do whatever you want on the engine side.
Get a good piece of Green stripe Gates or something thick walled to support the weight of the valve (not standard automotive heater hose).
-
I suppose I will go that route.... thanks chief :)