SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: jet crazy on July 06, 2016, 09:34:22 AM
-
Hey guys so I've been Trina to identify this bowl I got...so on the suction housing it says it's a legend pump but the transom housing says Berkeley and the diverter looks to be a Berkeley diverter. I'm just tiring to identify the bowl so I can get a wedge for it. If it a legend bowl in SOL in getting any kind of wedge.
Sent from my iPhone using SoCal Jet Boats
-
I can get more photos later too
Sent from my iPhone using SoCal Jet Boats
-
Looks like a Legend bowl and an old style Place Diverter. They just used a Berk TA.
GT
-
Looks low a Legend bowl and an old style Place Diverter. They just used a Berk TA.
GT
Dang...so am I able to get a wedge or a droop for this brand of bowl?
Sent from my iPhone using SoCal Jet Boats
-
Dang...so am I able to get a wedge or a droop for this brand of bowl?
Sent from my iPhone using SoCal Jet Boats
Should be the same flange as a Berkeley.
And yes.
Not sure I would use that Diverter with a droop though.
JMO
-
So I got some info.. I called AT they said they do make wedges for the old style legend and the new style legend. He said to check the back of the bowl where it mounts to the suction housing. If it's 3/4" hex head it's a newer bowl witch means 4* wedges are only $65 if the hex heads are 1/2" it's an older bowl witch means the 4* wedges are $166 I hope it's the newer style.
Sent from my iPhone using SoCal Jet Boats