SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Hddaddy on April 01, 2017, 11:07:29 AM
-
Okay, how do I remove these? They have never been removed. Final thing before powder coating.
Sent from my XT1585 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
If I remember correctly, they are one way pins, and once removed they get through bolted with s.s. Bolts and s.s. Nylock nuts but I could be completely off. I have done it this way before but I'm sure someone with more time on these will help out here good luck bud
Drinking a cold coors light and learning about boats
-
If I remember correctly, they are one way pins, and once removed they get through bolted with s.s. Bolts and s.s. Nylock nuts but I could be completely off. I have done it this way before but I'm sure someone with more time on these will help out here good luck bud
Drinking a cold coors light and learning about boats
What's the best way to remove? This is the only thing holding me up from getting powder coating done.
Sent from my XT1585 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Leave them in and mask the threads.
You can drive out the pins towards the thrust bearing, but that's kinda difficult unless the suction housing is double-drilled, passing a long drift punch through the bowl bolt holes.
-
Leave them.too much risk trying to put new ones in after pc with breaking the bosses.