Steering cable

« **on:** July 30, 2012, 03:59:42 PM »

So I need a new steering cable for my jet and can't find the correct one

My existing cable is a Morse A300624 192in M3778 that's whats stamped in the cable. It is a rotary type I would like to replace it all if possible. Any one have a link to the one I need to order?

Thanks for the help again
Mike

« **Reply #1 on:** July 30, 2012, 04:14:14 PM »

Call Joe over @ JP Marine...
619-443-3320

« **Reply #2 on:** July 30, 2012, 04:28:52 PM »

Look up Teleflex and your length. Morse don't makey no mo

Sent from my ADR6400L using Tapatalk 2

« **Reply #3 on:** July 30, 2012, 06:14:26 PM »

Quote from: BIG JOHNSON on July 30, 2012, 04:28:52 PM

Look up Teleflex and your length. Morse don't makey no mo

Sent from my ADR6400L using Tapatalk 2

Web sites says for v6 only up to 175hp

« **Reply #4 on:** July 30, 2012, 08:00:30 PM »

You're only using your cable to direct a nozzle..

A v6 outboard powerhead and drive is a lot harder to control.

Sent from my ADR6400L using Tapatalk 2

« **Reply #5 on:** July 30, 2012, 09:16:13 PM »

just get a rack and pinion kit with helm and call it a day. it'll feel a lot better than the rotary. assuming that you have the room to fit a rack and pinion setup under the dash...

http://www.ebay.com/itm/Teleflex-16-ft-Rack-and-Pinion-Steering-Kit-SS14116-/370630776506?pt=Boat_Parts_Accessories_Gear&hash=item564b50d6ba&vxp=mtr

$133 done for a 16' cable.

http://www.performanceboats.com/jet-boats/87770-rack-pinion-vs-rotary-steering.html

« **Reply #6 on:** July 31, 2012, 04:44:58 AM »

How much room is needed for the rack and pinion setup?

Santee_Native

Steering cable

Your Mom

Re: Steering cable

BIG JOHNSON

Re: Steering cable

Santee_Native

Re: Steering cable

BIG JOHNSON

Re: Steering cable

ka0tyk

Re: Steering cable

Santee_Native

Re: Steering cable