SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: mrben157 on June 04, 2019, 12:06:51 PM

Title: Hydraulic to manual diverter
Post by: mrben157 on June 04, 2019, 12:06:51 PM

Hello i just got ahold of a used hydraulic place diverter off of a parts boat. After hooking everything up i found out that the electric motor for the hydraulic pump is bad.
Can i simply buy a cable and handle then install it on the same diverter? I noticed that the upper hole that mounts the cylinder is oval shaped. Will this need to be drilled out to accommodate a cable?

Thanks

Title: Re: Hydraulic to manual diverter
Post by: bobjthomson on June 08, 2019, 04:37:52 AM

U need to replace the arm . It’s different shape to the hydraulic one , call Tim at place Diverter and he will gladly help u out


Sent from my iPhone using SoCal Jet Boats