SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: speedlover23 on September 16, 2008, 08:24:57 PM
-
ok boat has water logs and im puting headers on. My berk only has one water inlet jacuzzi has two can i block one off r do i run both r can some one tell me the right way to run the hoses.
-
??? I'm gonna have to go look at my WJ.
I only have one inlet, coming in on the right (passenger) side.
Maybe there is another one that is plugged off that I haven't looked for ???
-
i also have a WJ and i only have one inlet. i hope that i dont have two because i am running headers
The Beav
-
Mine only has 1 also
-
Thanks ill take a good look tomorrow and get back to you guys
-
ok boat has water logs and im puting headers on. My berk only has one water inlet jacuzzi has two can i block one off r do i run both r can some one tell me the right way to run the hoses.
IF equipped with two outlets (a few jacuzzis are) only use one (IMO) the water can either be plumbed thru the Xmans then to the block and out of the top to the rizers OR off the jet to the front of the block ,out of the divider ,into the Xmans and then to the rizers The first method is "Warmer" the second method we call the "cold" Water that passes thru the Xaust first will be preheated. If i've confused you call me Tom
Below is the " hot" example (water thru mans first)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Flogplumbing1.jpg&hash=86524c4298ecf6ee54ff8b10e0c673a61994afa9)
-
Just reread your first post Heres a link to simple header plumbing ,but you still only run one line in from the jet Tom
http://www.jetboatperformance.com/index.php?p=wrouting
-
thanks to j/b/p for the help
-
You are more than welcome !