SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: koyota93 on May 29, 2008, 04:16:34 PM

Title: JG Bowl with droop snoot on JE?
Post by: koyota93 on May 29, 2008, 04:16:34 PM
Just a thought. I had Jack McClure do my JE pump a few months ago, and he recommended getting a new bowl because mine was kinda worn. My works but not as good as a better one. I think he said one from a JC would work. I don't really plan on changing it right this second, but would eventually like to change the bowl and get a diverter. My question is: Can I put a JG bowl and droop snoot on? I know the droop requires extended steering adapters. JE has different steering than JG, JC, etc. Could I do it if I had a the nozzle and and steering arm from a JG? Are the cable ends different on JE? I know they come out from a different spot on the transom. Am I just spinning my wheels or should I just look for a JC bowl and get a diverter and forgetting adding a droop snoot. I think the JE intakes are smaller and have limitations, will they be able to handle a droop meaning that much more of the boat out of the water?

Its just a thought. It runs great after Jack did his magic. Probably just end up getting a PD, but I would still appreciate everyone's opinion.
Title: Re: JG Bowl with droop snoot on JE?
Post by: beerjet on May 29, 2008, 06:50:42 PM
Your gonna want a diverter anyways so I'd go that way and avoid all the headaches . It's all possible , just a whole lotta headache for not alot of benefit . Besides , the C bowls flow better than the G bowls do .

-beerjet-
Title: Re: JG Bowl with droop snoot on JE?
Post by: hotrod56cars on May 29, 2008, 09:21:01 PM
I don't think you can add a droop to a JE (with any bowl) but I could be wrong.
Title: Re: JG Bowl with droop snoot on JE?
Post by: jet boat performance on June 01, 2008, 12:49:47 PM
You can actually put a "split bowl" droop ,straight snoot etc etc but will find it simpler to reconfigure the steering to a "Splash well" type similar to those used in set backs etc , or face a bitch of a time trying to re engineer the "low mount" right side oe set up. Simple and easy ,dont buy you diverter till you've made the decision however . The standard (non "E") PD with work well with a Split bowl Droop combo and save you some bucks you will also need to do a little ride plate work  call if I can help you with this Tom

(not and "E"  but an example "splash well" for you )
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Fjosh%2FResizeofDSCF0146.jpg&hash=99e4baf0174a753ac50777e944a789134fc12d3c)
Title: Re: JG Bowl with droop snoot on JE?
Post by: koyota93 on June 01, 2008, 08:30:03 PM
Thanks for the reply Tom.
I'm not sure what I'm gonna do yet. $$$$ is always a limiting factor. I know I want a diverter and will probably just get that to save all the headaches. The pump is still fairly strong even with the existing bowl. Takes off great even with 6 people and a cooler.
SMFPacks CMS 1.0.3 © 2026