SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Maker on August 19, 2014, 06:25:36 PM
-
Is it possible for the housing that has the steering pins to be installed upside down I don't know if it's my eyes but the top pin appears to be farther back the bottom pin
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
Is it possible for the housing that has the steering pins to be installed upside down I don't know if it's my eyes but the top pin appears to be farther back the bottom pin
Sent from my SCH-I545 using SoCal Jet Boats mobile app
Well grab some measuring tools and find out... Use a 6" caliper to measure from the flange to the pin center. And yes, totally possible, they made several different steering adapters from a 4° to a 0°. Wedges are your friend.
GT
-
Ok thanks I would rather not use a wedge if I don't have to due to the color of the pump. I did find the cable was not adjusted correctly it seems this thing has a whole lot of down and not much up
Sent from my SCH-I545 using SoCal Jet Boats mobile app