SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: drogers87 on July 14, 2016, 12:45:27 PM

Title: Leak!
Post by: drogers87 on July 14, 2016, 12:45:27 PM

Hi guys,

On my first jet boat and been doing testing trying to get her dialed in! Was out on Elsinore last night (adjusting carb), I knew I had a small leak somewhere and found a streak coming in through the transom where the steering cable passes through. Looked on the outside of the transom and noticed a soft white washer/seal of some kind. It has dried out and cracked on the edges. I may be able to get away with tightening the nuts but I'd rather replace for peace of mind.

Any idea on where to get these? Can I use any kind of soft washer that fits or am I missing something important here? Can't seem to locate on the web anywhere...

Thanks for the help

Dan


Sent from my iPhone using SoCal Jet Boats

Title: Re: Leak!
Post by: glencoe460 on July 14, 2016, 03:19:42 PM

If your near elsinore, elsinore marine should be able to help you out. They got a special boot I needed for my steering cable that caused a leak.

Title: Re: Leak!
Post by: nickm on July 14, 2016, 03:45:58 PM

I GOT MINE FROM CPPERFORMANCE.COM IF YOU CAN WAIT A COUPLE DAYS

Title: Re: Leak!
Post by: drogers87 on July 14, 2016, 06:39:37 PM

Thanks guys I'll swing by Elsinore marine.


Sent from my iPhone using SoCal Jet Boats