SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: quick olds on May 07, 2013, 09:26:54 PM

Title: Loader install
Post by: quick olds on May 07, 2013, 09:26:54 PM

So i got a loader from beaver retriever and my buddie said to drill thru my suction housing and put nuts on the back of the screws is this true and if so do i tap the holes and what thread size and length are these its a berk jc and its the first thing ive done to the pump besides the diverter thanks for the info in advance

Sent from my SPH-D710 using SoCalJetBoats mobile app

Title: Re: Loader install
Post by: Beaveretriever on May 07, 2013, 10:03:13 PM

You drill 4 holes in the spot where the grate bolts to. Drill and tap with 3/8-16. Use 1" bolts in the front and 1-1/2 in the back. Use nylocks on the back bolts and lock the bolts in. Use lock tight on the bolts. That's should work that's what I did.

Sent from my SAMSUNG-SGH-I747 using SoCalJetBoats mobile app

Title: Re: Loader install
Post by: quick olds on May 07, 2013, 10:14:57 PM

Now thats customer service lol cool ill try to get it on this weekend im not makin the avi trip so i can put more cash into the boat thanks bud

Sent from my SPH-D710 using SoCalJetBoats mobile app