SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: TrailerHo on June 06, 2010, 07:59:37 PM
-
This is the loader that came on the boat when i bought it and I have no idea what it's about. is it a performance or special loader? Whatever the case is, is it a decent loader? Also does it work with what I have...
i have a semi-built 454
jg pump
A impeller
Thanks for the input. :beer:
-
Looks like a normal race style loader to me......Better than the angle iron welded to the rock grate style.....
Ray
-
To answer your question you need to supply a lot more info to get a realy good answer. Your HP, your RPM, your MPH, and some dimentions ramp widths, is the leading edges forward or aft of the mounting plate and how much, dimention above or below keel, where the're aiming ( high middle low). and most important what you use your boat for. If you like rock climbing it's not so good. If you cruise it almost doesn't matter. If you race it's critical. Take those dimentions and ask Greg Schoemaker over on Performance Boat or Tom here with Jet Boat Performance. They have sooo much experience with other people's boats they will get you in the ball game.
-
To answer your question you need to supply a lot more info to get a realy good answer. Your HP, your RPM, your MPH, and some dimentions ramp widths, is the leading edges forward or aft of the mounting plate and how much, dimention above or below keel, where the're aiming ( high middle low). and most important what you use your boat for. If you like rock climbing it's not so good. If you cruise it almost doesn't matter. If you race it's critical. Take those dimentions and ask Greg Schoemaker over on Performance Boat or Tom here with Jet Boat Performance. They have sooo much experience with other people's boats they will get you in the ball game.
Thanks for that. I will get that info as soon as I can. Alot of it is unknown right now but i'll work on it. Thanks again!