SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: morris951 on July 25, 2015, 04:08:58 PM
-
Hey I'm new here got my first jet boat a year ago, replaced seals and bearing on Berk 12jg a and now when I put it in the water I have no forward or reverse at first like air is trapped please help
-
Hey I'm new here got my first jet boat a year ago, replaced seals and bearing on Berk 12jg a and now when I put it in the water I have no forward or reverse at first like air is trapped please help
does it have a droop? How are you launching it?
Sent from my iPhone using SoCal Jet Boats
-
Fwrd/reverse gate open or closed
Sent from my iPhone using SoCal Jet Boats
-
Yes it does. . . I don't back in fast or anything I have tried leaving it tied to the dock for a couple minutes to see if that would help but it don't, I've asked a few people that have had jets for years but no one has ever heard of this
-
Open
-
A rock or something else in the impeller? Missing woodruff key?
Sent from my iPhone using SoCal Jet Boats
-
No, could the rope seals or anything else I did to it make it do this? But in forward or reverse with throttle does nothing then all of a sudden it will go
-
Hey I'm new here got my first jet boat a year ago, replaced seals and bearing on Berk 12jg a and now when I put it in the water I have no forward or reverse at first like air is trapped please help
. This is normal with s droop. You can open the bucket up and back in faster it helps a little. If you don't like it you can install a air bleed. Most of us are use to it.
Sent from my iPhone using SoCal Jet Boats
-
Thank you
-
Makes me feel better I'm not the only one
-
Thank you
your welcome sir
Sent from my iPhone using SoCal Jet Boats