SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: AQUAHOLIC on August 18, 2008, 09:48:54 AM
-
ok i am not sure if this is a pump problem or not but its a start. my boat does not get out of the hole very well. I was trying to pull up some skiers yesterday and the boat just didnt seem to want to do it. and it kind of sounded weird when i got on the throttle from a stop or a slow roll. Is there any kind of bolt on that can help the jet drive get the boat moving. also this might be a carb problem but there was no noticable bogging or studdering the engine just kind of sounded different and i noticed a problem.
anyway just wondering if any of you had had a problem similar to this and can help me out.
blythe this weekend.!!!!!!!!!!!!!!!!
-
What kind of rpm were you turning before it planed? Would be helpful info...
-
it would plan at about 2500 to 3k. but to tell you the truth i was not exactly watching the tach when i was trying to pull a skier. i am going back to the river this weekend so i can try and keep a closer eye on that and see what i come up with.
but during regular operation i would plan out around 3k.