SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: randog on February 19, 2014, 09:30:07 PM

Title: Place diverter
Post by: randog on February 19, 2014, 09:30:07 PM

Will a place diverter on a je pump work on a jc pump? i think I would need a deferent steering arm but the rest should work I think. Thanks


Sent from my iPhone using SoCalJetBoats

Title: Re: Place diverter
Post by: Ecm101 on February 22, 2014, 03:50:17 PM

As I recall a je is a split bowl while a Jc isn't, but that may not matter as the place diverter setup is from steering pins back, in which I cant see why not since the steering pin orifice dimensions should b the same. The split bowl versions just created an opportunity to modify the outlet design to accommodate wedges and snoots etc. then again, I might be just telling stories 😳


Sent from my iPhone using SoCal Jet Boats

Title: Re: Place diverter
Post by: Ecm101 on February 22, 2014, 03:54:39 PM

I'll take it upon myself to correct....myself... Place diverter has a different model for a je as opposed to Jc/jg models so.... I guess the answer is no


Sent from my iPhone using SoCal Jet Boats

Title: Re: Place diverter
Post by: More2LifeThanMPG on February 22, 2014, 09:43:06 PM

The two are one in the same, to is a adapter that is need for a jg bowl and not needed on a jc. I was informed if this in my quest for a diverter, so I such in pass the information learned.


Sent from my iPad using SoCalJetBoats

Title: Re: Place diverter
Post by: More2LifeThanMPG on February 22, 2014, 09:44:08 PM

Quote from: More2LifeThanMPG on February 22, 2014, 09:43:06 PM

The two are one in the same, to is a adapter that is need for a jg bowl and not needed on a jc. I was informed if this in my quest for a diverter, so I such in pass the information learned.

But a je bowl to totally different all together.


Sent from my iPad using SoCalJetBoats

Sent from my iPad using SoCalJetBoats