SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: hbkeith on April 16, 2019, 04:04:19 PM
-
Does anyone know why my place diverter buttons would shock me when I push either up or down buttons? I was told it was a grounding issue so I went straight to the engine block but no luck. The guys at place diverter tell me to run a power wire to the battery instead of the ignition switch but that is a pain in the ass on my boat and I cant understand how that would make a difference although electrical is not my thing. Just curious if anyone has heard of this and what the solution was.
-
Does anyone know why my place diverter buttons would shock me when I push either up or down buttons? I was told it was a grounding issue so I went straight to the engine block but no luck. The guys at place diverter tell me to run a power wire to the battery instead of the ignition switch but that is a pain in the ass on my boat and I cant understand how that would make a difference although electrical is not my thing. Just curious if anyone has heard of this and what the solution was.
Got any pics of the switch set up? Might help us give some ideas for ya
Sent from my SM-N960U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
What switch do u have ??? The toggle one ??? Check the back of the switch to make sure non of the hot wires are touching the case . Have seen this before . If not then u need to change the switch out . The older switch has a orange wire in the middle and is used as a bridge wire . The newer ones have a screw that is used as a bridge .
Sent from my iPhone using SoCal Jet Boats