SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: hallett1974 on February 25, 2015, 11:29:49 AM

Title: Place Diverter cable length.
Post by: hallett1974 on February 25, 2015, 11:29:49 AM

I just wanted to know if anyone knew what length of cable i would need for my 19 1/2 foot Hallett, or were i should measure from?  I going to use a stringer handle since the Hallett is a full stringer boat, and would like to mount it between the legs.  If that helps.  Thanks again for the help.

Title: Re: Place Diverter cable length.
Post by: hallett1974 on February 25, 2015, 04:48:49 PM

Ok how about were i should start to measure from?

Title: Re: Place Diverter cable length.
Post by: ajliuzzi on February 26, 2015, 07:34:36 AM

Use a length of rope or hose and run it where you want your cable to be... Start at the stringer where the handle will mount then through the interior of the boat as desired and out the transom up about a foot and down to your diverter


Sent from my iPhone using SoCal Jet Boats

Title: Re: Place Diverter cable length.
Post by: hallett1974 on February 26, 2015, 08:03:31 AM

Copy that you sir.