SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: JTMoney on June 14, 2014, 01:27:24 PM
-
So I just got a new Bennet pump and it works fine except when it hits full up. It seems to lock up and when I try to go down you hear the pump try to pump but it won't move. If I loosen a line and move it down a little it works fine in the up and the down. But as soon as I go all the way up its stuck. What should I do?
-
So I just got a new Bennet pump and it works fine except when it hits full up. It seems to lock up and when I try to go down you hear the pump try to pump but it won't move. If I loosen a line and move it down a little it works fine in the up and the down. But as soon as I go all the way up its stuck. What should I do?
Call Tim at place, they have been having some issues with pumps lately,
Sent from my iPad using SoCal Jet Boats
-
I figured it out. Well at least for now. The solenoid a were super tight. Cracked them loose and snug it back and it's seems to be working. Or I put the battery on the battery charger to make sure I had plenty of power and that solved. But I suspect the solenoids more then anything.
Sent from my iPhone using SoCal Jet Boats
-
I figured it out. Well at least for now. The solenoid a were super tight. Cracked them loose and snug it back and it's seems to be working. Or I put the battery on the battery charger to make sure I had plenty of power and that solved. But I suspect the solenoids more then anything.
Sent from my iPhone using SoCal Jet Boats