SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Diablo on March 21, 2007, 01:54:16 PM
-
Last year my place diverter was working fine, then it stoped working altogehter, I checked the fuse and it was blown so I replaced it and then tried it and it made some noise but then the fuse would blow again. ??? ???
-
Sounds like an electrical problem, I've never worked on one so... ??? I'd have to see it to diagnose it.
-
check the switch itself my freinds did the same and the switch was bad it was grounding out hope this helps :)
-
Most likely the Bennet pump is crapping out.
Check everything out first though.
http://www.socaljetboats.com/index.php?topic=328.0
-
Well I checked everything today and looked good when you hit the switch it makes a light sound when you click up or down but nothing happens. The sound is not constant just when you hit the switch.
-
That is because that is the only time the motor has power.
-
So does that mean the motor is not working and I need to buy a new Bennett Hydraulic Pump ?
-
Well I would smack the motor with a big mallet and see if it starts working.
I know, I know.............This is what Place does per Lillrick. This will free up the brushes. If it still doesnot work then I have one for you.
-
How much?
-
http://www.socaljetboats.com/index.php?topic=328.0