SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: glencoe460 on February 14, 2018, 07:11:56 PM

Title: Pump rebuild issue i think
Post by: glencoe460 on February 14, 2018, 07:11:56 PM

So i just freshly rebuilt my pump and motor....motor runs great boat runs really good overall but i noticed my place diverter point all the way up my rooster only goes up about 2-4 ft where it used to go way higher...

I replaced impellar from alluminun to stainless wondering if thats a factor...i dont feel any cavitation boat runs good...whats your guys opinion on this one....its berkley je by the way

Sent from my SM-G930T using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Pump rebuild issue i think
Post by: JordanDangerfield on February 14, 2018, 09:38:47 PM

The impeller wouldn’t change that. It’s probably the adjustment in your diverter cable.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Pump rebuild issue i think
Post by: mash on it on February 15, 2018, 07:00:45 AM

Quote from: JordanDangerfield on February 14, 2018, 09:38:47 PM

The impeller wouldn’t change that. It’s probably the adjustment in your diverter cable.


Sent from my iPhone using SoCal Jet Boats

X2

Title: Re: Pump rebuild issue i think
Post by: 77_liberty on February 15, 2018, 06:21:17 PM

Cable is probably slipping. Check the cable mount it may be sliding in it


Sent from my iPhone using SoCal Jet Boats

Title: Re: Pump rebuild issue i think
Post by: glencoe460 on February 16, 2018, 12:03:02 AM

Thanks ill check all the above...

Sent from my SM-G930T using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Pump rebuild issue i think
Post by: placecraft jess on February 16, 2018, 11:00:58 AM

When this happened to my Boat the clamp that holds the cable by the handle broke


Sent from my iPhone using SoCal Jet Boats

Title: Re: Pump rebuild issue i think
Post by: glencoe460 on February 18, 2018, 05:47:28 PM

Ok guys so i checked the cables they seem to b good but now i noticed today on a test run i got water shooting up....whats your thoughts?

Sent from my SM-G930T using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Pump rebuild issue i think
Post by: 69kona on February 18, 2018, 05:53:12 PM

Quote from: glencoe460 on February 18, 2018, 05:47:28 PM

Ok guys so i checked the cables they seem to b good but now i noticed today on a test run i got water shooting up....whats your thoughts?

Sent from my SM-G930T using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

There’s a Teflon o ring that seals it .. where it pivots .


Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)