SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: Jet Boat Maloney on October 09, 2013, 01:53:10 AM

Title: Removing the bowl
Post by: Jet Boat Maloney on October 09, 2013, 01:53:10 AM

Can I just unbolt the bowl and remove it? My jet is set back and the bolts are easily accessible. Will I run into any problems just want to repaint it?


Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Removing the bowl
Post by: Your Mom on October 09, 2013, 06:50:22 AM

Might have to replace the gaskets...while its off check the seal.

Title: Re: Removing the bowl
Post by: SoCalPSD on October 09, 2013, 08:24:10 AM

The bowl gasket, shaft seal and o ring are like 20 bucks shipped. its worth it to buy and replace them when you pull it apart. I was told to never use silicone instead of a bowel gasket because it will blow out and if it doesn't you'll have a hell of a time getting it apart the next time


Sent from my iPhone using SoCalJetBoats

Title: Re: Removing the bowl
Post by: Jet Boat Maloney on October 09, 2013, 09:54:00 AM

Thanks


Sent from my iPhone using SoCalJetBoats mobile app